Cable Trays in Egypt
SANNA3 manufactures cable trays in Egypt for contractors, system integrators and project procurement teams. Our factory is in Shabramant, Giza. Send your drawings or bill of quantities for a quotation based on the required dimensions, material, finish and quantities.S-TRAY is the cable management brand of SANNA3 for Metal Fabrications. The catalogue and project references below help procurement teams identify cable tray requirements for technical review and quotation.
Request a quotationتصنيع كابل تراي في مصر حسب متطلبات المشروع
تُصنّع SANNA3 حوامل الكابلات من مصنعها في شبرامنت بالجيزة. أرسل المقايسة أو الرسومات مع الكميات والخامة والتخانة والتشطيب المطلوب. تُراجع تفاصيل التصنيع والأغطية والإكسسوارات والمستندات المطلوبة، ويُحدد نطاق التوريد ومواعيده في عرض السعر قبل الإنتاج.وتُقدّم الشركة أنظمة إدارة الكابلات تحت علامتها S-TRAY التابعة لـSANNA3 لتصنيع المعادن. يمكنك مراجعة الكتالوج وسابقة التوريد أدناه لتحديد متطلبات عرض السعر.
أرسل متطلباتك لطلب عرض سعرPerforated cable trays and fittings
Cable tray catalogue and dimensional options
Our cable tray and ladder catalogue includes straight perforated trays, route fittings, ladders, channels and brackets. The straight perforated tray table lists widths from 100 to 1,000 mm, side heights from 50 to 100 mm and sheet thicknesses from 1 to 2 mm. Use the catalogue to identify your required profile and item, then send the specification and quantity for review. These are catalogue ranges, not confirmation of every width, height and thickness combination. Final material, tray and cover thickness, finish, support spacing and any required load or compliance documentation must be agreed for the specific order. Catalogue drawings and images labelled for illustration are illustrative. View the SANNA3 Cable Tray and Ladder Catalogue (PDF, 2 MB) Request a quotation for your selected itemsProject reference: Orange data centre, October, Giza
SANNA3’s reference list records the supply of galvanized-steel cable trays and baskets for a data centre project in October, Giza, in 2024. The listed contractor is AFRO and the project owner is Orange. The stated scope is supply of the cable-management products.سابقة توريد موثقة لحوامل الكابلات
تتضمن قائمة سابقة أعمال SANNA3 توريد كابل تراي وسلال كابلات من الصلب المجلفن لمشروع مركز بيانات في أكتوبر بالجيزة سنة 2024، مع AFRO كمقاول وOrange كمالك للمشروع. أرسل المقايسة أو الرسومات لتحديد نطاق توريد مشروعك ومواصفاته.View more SANNA3 project references and recorded supply scopes
Project-specific technical review: Al Rozimat wastewater treatment plant
An ECR (Engineering Consultancy & Research) letter dated 12 June 2025 records no objection to approval of SANNA3’s cable tray technical offer for the Al Rozimat wastewater treatment plant in Hosh Eissa, Beheira, subject to the stated project conditions.
The letter requires compliance with the cable specifications, lengths and routes shown on the drawings approved by the owner’s consultant. It also specifies a tray height of 100 mm and a minimum thickness of 2 mm for the supplied quantity covered by that submittal. This records the named project’s technical review; requirements and approval documents for new projects are reviewed separately.
مراجعة فنية مشروطة لمشروع محطة معالجة الرزيمات
يتضمن ملف المشروع خطابًا من ECR بتاريخ 12 يونيو 2025 يفيد بعدم الممانعة من اعتماد العرض الفني لشركة SANNA3 لحوامل الكابلات بمشروع محطة معالجة الرزيمات، مركز حوش عيسى بمحافظة البحيرة، مع الالتزام بملاحظات الخطاب.
تشمل المتطلبات الالتزام بمواصفات وأطوال ومسارات الكابلات طبقًا للرسومات المعتمدة من استشاري المالك، وارتفاع 100 مم وتخانة لا تقل عن 2 مم للكميات التي يشملها هذا التقديم الفني. يخص هذا السجل مراجعة المشروع المذكور؛ وتُراجع مواصفات ومستندات اعتماد كل مشروع جديد بصورة مستقلة.
Send your project specification and required technical documents for review
Cable trays, covers and fittings for your project
Define the complete cable tray requirement, rather than the straight sections alone. Identify the required tray profile, perforation pattern, covers and route changes on the drawing. List bends, tees, reducers, brackets and other accessories separately so the quotation can address the complete requested scope. For routes specified as ladders, review our cable ladders page and include the project specification. Dimensions, tolerances, finishes, testing requirements and delivery terms are agreed for each order.What to include in your cable tray BOQ
| Item | Information to provide |
|---|---|
| Tray size and profile | Width, side height, length, perforation requirements and drawing reference. |
| Material and thickness | Specified sheet material and thickness for each tray or cover item. |
| Surface finish | Project coating or surface-protection specification, including colour where applicable. |
| Covers and accessories | Required covers, fittings, brackets and quantities as separate line items. |
| Quantity and delivery | Quantity per size, units, delivery location and requested delivery date. |
| Technical documents | Drawing revision, support or load requirements, applicable standards and inspection or approval documents requested by the project. |
From drawings to an agreed supply scope
- Send your requirement. Share your BOQ, drawings, company details and the requested delivery location and date.
- Review the details. Confirm dimensions, material, finish, accessories and any technical documents needed for the project.
- Approve the quotation and production details. Check the quantities, drawing revision, included items and agreed terms before manufacturing starts.